1 Using your ADT SAFEWATCH EZ Deadbolt-Activated Home Security System PATENTED OI269B 2/02
10 EXITING WITH THE SYSTEM ALREADY ARMED 1 Press the STAY button. The ARMED indicator will light and STAY will begin to flash, indicating the 60
11 EXITING WITH THE SYSTEM ALREADY ARMED 1 Press the AWAY button. The ARMED indicator will begin to flash, indicating the 60 second exit delay p
12 EMERGENCY BUTTONS The Emergency Buttons, if programmed, are always active, whether the system is armed or disarmed. The Emergency Button must be
13 DISARMING THE SYSTEM Disarming when returning home: When returning home, simply unlocking your deadbolt from the outside will automatically disa
14 If an alarm occurs while you are at home: The EZ Touchpad siren will sound and the red ARMED light will flash. Proceed with caution! If you suspe
15 If a fire is detected, the siren will sound a distinct pulsating tone and the FIRE indicator on the EZ Touchpad will be flashing. If a Fire Alar
16 FIRE PROTECTION Preparing a Fire Escape Plan Even with the most advanced fire alarm system, adequate protection requires an escape plan. To prepare
17 Your ADT Safewatch EZ System is constantly monitoring its own components, as well as all critical services, such as AC power and the telephone line
18 SYSTEM TROUBLE ERROR CODES TBL Flashes / Touchpad beeps READY Flashes Trouble Condition Action 6 NONE Lost Key Mode This is a rem
19 The space below is for recording the descriptions of the zones in your system. •If the system has a faulted zone, count the number of READY light
2 Congratulations on your purchase of a new Deadbolt-Activated SAFEWATCH EZ Security System. This revolutionary new concept in residential security m
20 The EZ-IFOB is a uniquely coded digital key which performs the following functions when inserted into the EZ-IFOB slot on the EZ Touchpad: •Disa
21 Lost Key Mode In the event that the keys to your deadbolt are lost or stolen, the system may still be used by arming in the Lost Key mode. In
22 FEDERAL COMMUNICATIONS COMMISSION (FCC) Part 68 STATEMENT This equipment complies with Part 68 of the FCC rules. On the front cover of this equipm
23 WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM While this system is an advanced design security system, it does not offer guaranteed protection aga
24 WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM (Continued) •Even if the system responds to the emergency as intended, however, occupants may have i
25 LIMITED WARRANTY Terms and Conditions Applying to Sale of Equipment 1. Limited Warranty. Any part of the system, including the wiring, installed
26 This warranty is in lieu of all other express warranties. Any implied warranties of merchantability and fitness for a particular purpose are limite
27 THE FOLLOWING STATEMENT IS REQUIRED BY THE FCC RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limi
ADT Security Services 1750 Clint Moore Rd. Boca Raton, FL 33431 Copyright © 2002
3 TABLE OF CONTENTS TABLE OF CONTENTS INTRODUCTION ... 2 TESTING THE SYSTE
4 READY ARMED STAY FIRE TBL • EZ TOUCHPAD INDICATORS The green READY light shows the status of the zones in your system: ON indicates that all zones a
5 EZ TOUCHPAD CONTROLS STAY Button - Press to arm system in the STAY mode. Perimeter devices such as windows and doors will be protected, while inte
6 ARMING WHEN LEAVING 1 Check the EZ Touchpad indicators. The green READY light should be ON-STEADY, indicating that the system is ready to arm. •I
7 BYPASSING FAULTED ZONES If you are trying to arm with a faulted zone or zones, the green READY light will be blinking out the number of the faulted
8 ARMING WHEN STAYING HOME Arming in the Stay mode allows you to remain home with the perimeter protection active and the interior protection off, so
9 ARMING AND LEAVING WITH OTHERS STAYING 1 Check the EZ Touchpad indicators. The green READY light should be ON-STEADY, indicating that the system i
Commentaires sur ces manuels